Step 1 of 14: Granny Flat Design - number of rooms
In NSW, Granny Flat cannot exceed a total of 60 m2 (for both Single and Double Storey) for living area and within 8.5 metres in height. You can only have 1 Granny Flat per lot. Lot area must be at least 450 m2.
Please select your Granny Flat design. Your Granny Flat final design will be custom design base on your land conditions and your information input below.
Step 2 of 14: Building Type
Depend on your local council's regulations and land conditions, Granny Flat can be built as Single or Double Storey
What option would you prefer?
Step 3 of 14: Garage
Garage, Carport, Porch, Alfresco, Balcony or Patio are classified as non-habitable space and can be attached to a Granny Flat without it being counted as part of the 60m2 livingarea
What option would you prefer?
Entry Porch and Rear Attached Alfresco
Please adjust the squared metre of Entry Porch or Rear attached Alfresco. If none, leave at "0"
Step 4 of 14: Approval type
Which option would you prefer to apply for the approval?
Step 5 of 14: External wall material
Which external wall material would you prefer? Sorted from lowest to highest construction cost
Step 6 of 14: Roof type
Which roof type would you prefer? Sorted from lowest to highest construction cost
Step 7 of 14: Roofing material and Insulation
Which Roofing Material would you prefer?
What option would you prefer for Insulation?
Step 8 of 14: Timber Framing and Internal wall height
What option would you prefer for Timber Framing?
What option would you prefer for Internal wall height?
Step 9 of 14: Ceiling Cornice and Internal Lining
What option would you prefer for Ceiling Cornice?
What option would you prefer for Internal Lining?
Step 10 of 14: Kitchen inclusion
What option would you prefer?
Step 11 of 14: Bathroom(s) inclusion
What option would you prefer?
Step 12 of 14: Laundry inclusion
What option would you prefer?
Step 13 of 14: Flooring
Which flooring material would you prefer?
Step 14 of 14: Additional Service(s)
Please adjust number of each required Additional Service(s) listed below. If none, leave at "0"
Summary
Step 1 of 14: Granny Flat Design - number of rooms:
Step 2 of 14: Building Type:
Step 3 of 14: Garage:
Entry Porch and Rear Attached Alfresco:
Entry Porch in squared metre(s):
Rear Alfresco in squared metre(s):
Step 4 of 14: Approval type:
Step 5 of 14: External wall material:
Step 6 of 14: Roof type:
Step 7 of 14: Roofing material and Insulation:
:
Step 8 of 14: Timber Framing and Internal wall height:
:
Step 9 of 14: Ceiling Cornice and Internal Lining:
:
Step 10 of 14: Kitchen inclusion:
Step 11 of 14: Bathroom(s) inclusion:
Step 12 of 14: Laundry inclusion:
Step 13 of 14: Flooring:
Step 14 of 14: Additional Service(s):
Mirror Sliding Wardrobe:
Ceiling Fan with LED light:
2.5kw Air Con Split Unit:
5kw Air Con Split Unit:
1.8m Glass Sliding Door:
2.4m Glass Sliding Door:
Thank you for your patient
ESTIMATE QUOTATION

Your estimate quote by Verdant Construction $ + 10% GST

For the total price and inclusions, click “Request On-site Consultation” or “ Request Phone Call Consultation” below to request a FREE consultation from our builders today.

The completion time for a standard Granny Flat project is typically estimated to be anywhere from 6 to 8 weeks for the Design and Approval process, plus 10 to 14 weeks for the Construction stage. The completion timeframe is primarily impacted by the scope and quantity of work, but the most critical factors are the weather conditions, underground work involved, site clearing and accessibility.

This quote is generated based on your input information and the material selected. Price can vary depending on the option selected. Do NOT treat this as the final building cost to determine the total building cost.

To get the most accurate quote possible, our builders will need to assess the job site and consider any specific requirements or preferences you may have.

Contact us today to schedule your free consultation and get started on your dream project(s).

Mail choose something about you